
Service all over Greece
Service and fault repair
Bell not ringing? Clock stopped? Before you call us, try the simple checks below — and if that does not solve it, we come to your church wherever it is in Greece; abroad, we prepare the proposal from your photos and measurements and take on the project as far as installation, as in Batumi.
Fault guide
If… then…
Simple checks the sexton can make safely. Do not open electrical panels (230 V).
| If… | Then… |
|---|---|
| Nothing works, the screen is blank | Check the church’s main switch and fuse, then the fuse of the controller. If everything is fine, call us. |
| The screen shows the wrong time or date | Usually after a power cut lasting several days. Correct the time — the schedule runs on the time shown on the screen. How to correct the time. |
| The screen is on, but nothing rings on time | Check whether the automatic schedule has been suspended (e.g. a lit “cancel” light or an unlit programme icon). |
| Only the hours do not strike | Check whether the hour strike has been switched off or whether quiet hours are in force. |
| One bell does not ring | Try it with its manual button. If the striker does not move: coil, cable or relay. If it moves but does not reach the bell: it needs adjusting by a technician. |
| The sound is weak or muffled, the striker “sticks” | Oil the plunger with machine oil (every 3–4 months). Check the rubber pad and the spring. |
| The striker gets hot or smells burnt | Stop operation and let it cool down. The coil may be worn — call us. |
| The motor-driven bell does not swing | Possible fault in the motor, the relay or the swing settings — a technician is needed. |
| The remote control does not work | Replace the battery and try again closer to the bell tower. |
| The Wi-Fi app shows the buttons “greyed out” | The Wi-Fi unit has lost the network: check the church’s router and internet connection. It reconnects by itself. |
| The clock hands show a different time from the screen | The tower clock needs to be synchronised from the controller’s menu. |
| After a storm or lightning strike | Check the fuses. If the screen has “frozen” or shows garbled characters, call us. |
What we repair
Service for every part of the bell tower
- 01
Bell controllers
Diagnosis, repair, reprogramming and upgrades.
- 02
Bell strikers
Replacing coils, rubber pads and springs, adjustments, replacing old strikers.
- 03
Bell swing motors
Checking and repairing swing motors, relays and settings.
- 04
Tower clocks
Synchronisation, movement repairs, dial replacement, GPS upgrades.
- 05
Bells
Checking the hanging, the clapper and the supports; replacing a cracked bell.
- 06
General service
Per bell: rubber pads, oiling, springs, cleaning and painting — plus a general check of the whole system, so the bell tower is ready before the great feasts.
From our service work
Before and after


