TSITOURAS FOUNDRY GROUP·Foundry & machine shop at foundry.gr
Bell with a Tsitouras electromagnetic striker in a bell tower

Designed and made by us

Bells with electromagnetic strikers

The bell striker is the “heart” of automatic bell ringing. Ours was designed in our own factory to last for years and to cope with ringing that goes on for hours.

Designed and built by us

Our electromagnetic striker, part by part

Turn it, open it up and see every part. We design it in CAD and build it in our own works — its cast body comes from our own foundry.

Exploded 3D model of the Tsitouras electromagnetic bell striker: ball, plunger, rubber, housing, coil, end cap and screws

Drag with the mouse to turn it · click a part to see what it does.Swipe left or right to turn it · tap a part.

Tap a part

You will see what it is and what it does.

The parts

How it works

  1. The bell-ringing controller sends a short pulse of current — exactly as long as each bell needs.
  2. The coil becomes an electromagnet and throws the plunger forward: the ball strikes the rim of the bell.
  3. The plunger returns at once, so the bell rings freely and the sound is never muffled.

Construction

Built to last

  • Heavy-duty cast body with cooling fins, so it does not overheat during long ringing sessions.
  • Return spring after every blow, for fast, clean ringing.
  • Adjustable strike time set from the bell controller, for the right sound on every bell.
  • Fits existing bells too, mounted on site at the church.
  • Extra rubber pads where a lower volume is needed.
  • 2-year warranty of good performance, when the installation is carried out by our own team or by an authorised technician.

Our bell striker grew out of our own inventions: the Greek patents of Evangelos Tsitouras for an electromagnetic striking and bell-ringing system (GR 871712, 1987 · GR 1001052, 1991).

Tsitouras electromagnetic bell striker mounted beneath a bell
Tsitouras bell striker mounted on a bell

Maintenance

A little care, years of service

Every 3 to 4 months, oil the plungers of the strikers with a little machine oil. If the sound changes, or if a striker “sticks” or does not strike, it may need a new rubber pad, spring or coil — work we carry out all over Greece.

For sextons who want to do it themselves, we are preparing instructional videos: replacing the coil, replacing the rubber pad and spring, and taking the striker apart.

Bell striker part during servicing

For existing bells too

Automatic ringing on every bell

We can fit electromagnetic strikers to all our tuned bells — and to the bells your church already has — so that they ring automatically from the bell-ringing controller.

  • 01

    On existing bells

    We fit strikers on site at the church, without taking the bell down.

  • 02

    All over Greece

    We come wherever your church is, study the bell tower and propose a solution; abroad, we prepare the proposal from your photos and measurements and take on the project as far as installation, as in Batumi.

  • 03

    Advice on the sound

    We advise you on getting the most tuneful, harmonious sound from your bells.

  • 04

    Service

    Replacing the coil, rubber pad and spring, adjustments — with instructions for the sexton.

From the bell towers

Strikers at work

Talk to our technician about your church’s bells

Call +30 210 555 0700